by Trinten » Tue Mar 03, 2015 9:11 am
Hey Chug!
So I did some googling, found this post by John Stricker on Pennocks about this:
"'84 4 cylinder is slightly different than '85-87 4cyl, but not by a lot, IIRC. I know I've made an '84 work on an '86
I don't know what an '88 4 cyl one is like, I've never actually seen a set from that model."
Here's the thread:
http://www.fiero.nl/forum/Archives/Arch ... 87452.htmlFrom reading the rest of that thread... it sounds like some folks have run into some interesting things with stuff from the factory.
1986 Pontiac Fiero GT, 355 cubic inch small block Chevy putting down 371 HP and 381 ft/lbs torque at the wheels, with more to come!