by Drew-py » Sat May 03, 2014 8:40 am
I get mine from Advance Auto and they state American made, however there is 2 different shaft diameters the smaller .92 I have busted on the road. the other is 1.02 diameter much stronger it took a hard 2200 RPM clutch drop throttle stomp track launch to snap it and wow did it make a BOOM. I am currently using another set of 1.02 shafts on both sides for about 1 1/2 yrs now putting about 300-ish HP to the ground then and now a proven 353HP to the wheels after some new engine mods. I am not one to pass up a little fun well actually its fun passing them kids up with their "hotrod car" I use my car as it was designed and get heavy footed from time to time. Back to the 2 types of axles its a luck of the draw as to which ones are it the box because there is not part # designation to identify which is which so bring a measuring caliper and start opening boxes.
87 GT 3800 II SC, 07 GXP, 91 GMC Syclone #2811