new to forum and fieros

Introduce yourself here!

new to forum and fieros

Postby RWalls » Sat Mar 02, 2013 5:01 pm

hey everyone i live in jacksonville and just got a new to me 87 fiero gt its in rough shape inside and out it has a drive shaft seal leaking but like i said im a newbie so will becoming here to get some help every now and again thanks
RWalls
 
Posts: 2
Joined: Thu Feb 28, 2013 9:02 pm
Location: jacksonville

Re: new to forum and fieros

Postby whiteandnerdy27 » Sat Mar 02, 2013 9:14 pm

Welcome to our addiction!
whiteandnerdy27
 
Posts: 17
Joined: Tue Aug 14, 2012 6:09 pm
Location: Troutman, NC

Re: new to forum and fieros

Postby Chug » Sat Mar 02, 2013 10:11 pm

Hey!!! Welcome There are 4 that I know of in Jville, 2 of them are on here. Me in the 84 Indy and Drewpy in the 87 3800sc2 5spd.

Shoot me a pm and come on by and lets have a look at the car!!
Yes it can be done, it just depends on how deep your wallet is!
User avatar
Chug
Moderator
 
Posts: 298
Joined: Mon Jun 11, 2012 2:02 pm

Re: new to forum and fieros

Postby Drew-py » Sat Mar 02, 2013 10:41 pm

welcome we can help you with it all alright, axle shaft seal leaking oh-yeah we got that fix
87 GT 3800 II SC, 07 GXP, 91 GMC Syclone #2811
Drew-py
 
Posts: 339
Joined: Thu Jun 28, 2012 9:18 am
Location: Jacksonville NC moved to St Louis Mo, April 2013

Re: new to forum and fieros

Postby RWalls » Sun Mar 03, 2013 12:16 am

okay so i went to oreilly auto parts and got a new seal but im not a 100% if it was the right one thinking might be the one for the auto trans and not the manual any help
RWalls
 
Posts: 2
Joined: Thu Feb 28, 2013 9:02 pm
Location: jacksonville

Re: new to forum and fieros

Postby CowsPatoot » Sun Mar 03, 2013 2:15 am

Toss us an item number....or a photo of it....or some way of IDing it and we can probably confirm if it is the right one or not.

Oh...and welcome to the loony bin....we have your padded room waiting.
CowsPatoot
 
Posts: 90
Joined: Fri Jun 08, 2012 1:48 pm
Location: Wilkesboro, NC

Re: new to forum and fieros

Postby Red86GT » Sun Mar 03, 2013 6:42 pm

Welcome!
Red86GT
 
Posts: 116
Joined: Tue Oct 02, 2012 6:27 pm
Location: High Point, NC

Re: new to forum and fieros

Postby Drew-py » Tue Mar 05, 2013 5:02 pm

The right hand and left hand side seal are both the same item and #. It should be a "National" part # of 3543 and looks like this. If it does not look like this then look at the Fiero Store's trans axle reinforcement bearing and seal and see if that's what you have / want or need
Image
Last edited by Drew-py on Sat Mar 09, 2013 11:57 pm, edited 1 time in total.
87 GT 3800 II SC, 07 GXP, 91 GMC Syclone #2811
Drew-py
 
Posts: 339
Joined: Thu Jun 28, 2012 9:18 am
Location: Jacksonville NC moved to St Louis Mo, April 2013

Re: new to forum and fieros

Postby Trinten » Sat Mar 09, 2013 11:30 pm

Welcome to the boards!
1986 Pontiac Fiero GT, 355 cubic inch small block Chevy putting down 371 HP and 381 ft/lbs torque at the wheels, with more to come!
User avatar
Trinten
Site Admin
 
Posts: 521
Joined: Mon Jun 04, 2012 7:02 pm
Location: Charlotte, N.C.

Re: new to forum and fieros

Postby Thaidon » Sat Mar 09, 2013 11:47 pm

Welcome, welcome!
You can't make stupid beautiful...
Thaidon
 
Posts: 95
Joined: Sat Oct 20, 2012 5:55 pm
Location: Gastonia, NC



Return to Newbies




Users browsing this forum: No registered users and 1 guest

cron